My Netgear router stopped working after I updated its firmware. Firmware updates are essential, so I got the update done, but the Netgear router is not working right after the update was done. I need help. Are you also facing a similar issue with your Netgear WiFi router? Yes? Well, there is nothing to be worried about as you have landed on the right post. Here, we have penned down the solutions that are very effective in fixing Netgear router not working issue. Go on reading ahead.
Netgear Router Not Working. Let’s Fix it!
1.Perform a Power Cycle
You should power cycle the whole home network now if the Netgear router has stopped working completely. There could be glitch that is stopping the router from working. So, power down the devices in the network. That means you need to power off the Netgear router and the modem. Do remove their power cables as well from the respective power outlets. Wait for a certain amount of time now and then power on the devices once again. You should often reboot your devices. Has this process fixed the router? Is the router working now? Go to the next hack if it is not yet fixed.
2.Check Power Connection
If the Netgear WiFi router is not working then there could be a power related trouble responsible for it. You should hence have a look at the power socket and the power cable of the router and the modem. If any of it is damaged then get it fixed or replaced now. You should also ensure that the power cable is not plugged loose. Make the required changes right now. The router should be fully powered on and receiving a consistent power supply. You can use a UPS if required.
3.Fix Router Modem Connection
In case the Netgear WiFi router is not connected properly to the modem, then you will get issues with your router. You should check the LAN cable that is put to use to make the connection between the WiFi router and modem. It should be damage free. Get it fixed or replace it now. You should also see to it that the cable is inserted into the right ports on both devices.
If you’ve made the connection between the devices wirelessly, then you should ensure that the router is placed within the range of the modem. Shift the router accordingly and them see if the issue fixes or not.
4.Reset the Router
If you are still not able to make your Netgear WiFi router turn on, then reset it now. Resetting will get the factory settings restored on it. Since the router has stopped working after the firmware update, there are chances that firmware is not updated correctly. So, reset it now. Turn on the router and press the Reset button. This will restore the default factory settings on the router. Access the Netgear router login page now get the setup done once again from scratch.
Update Your Netgear Router
After setting up your Netgear WiFi router, you should once again try to update its firmware to the latest version. Firmware updates are important. It is equally important that you update the firmware in a proper way. Make sure that you download the right firmware file for the router model that you have in case you are manually updating your router. Also, do not interrupt the process in between while the firmware is getting updated.
Refer to the user manual and see how you can update the firmware on your Netgear WiFi router by accessing the Nighthawk router login page.
Wrapping Things Up
After you have reset your Netgear extender and set it up once again, I the router should be up and running normally without giving you issues. sS you have also updated the firmware on it to the latest version, you have ensured that its performance is improved and also it is away from bugs. You can now connect your devices to the Netgear router’s WiFi and enjoy lag free internet access throughout your home.